Activity

Thanks! The video was all recorded with the SL. Most of the footage was shot with the 35mm Summilux-TL, the beginning tracking shots were with the 23mm Summicron-TL, and the close-up beauty shots were with the 24-90 SL.

So David, who was the video shooter? Nice work.

Bernard,

Yes, this is planned for the future for sure. There is a lot of uncertainty surrounding best practices for video. So many variables.

I will certainly inquire about the ACES workflow, and work to educate myself more on this evolving standard.

Thanks for the feedback.

Scott,

There is an audio adapter for the SL to accept 3.5mm miniphone input and also provides a 3.5mm headphone jack for monitoring.

For capturing video, I use a Video Devices PIX-E5H 5″ recording monitor which takes the clean feed off the sensor over HDMI. This allows me to record at 10-bit 422 rather than 8-bit 420 to the SD card. There are other advantages besides the improvement in image quality, but this is a big one. The PIX-E uses the Apple ProRes 422 codec so Final Cut X workflow would be great. I just prefer the Adobe CC ecosystem and work on both Mac and PC, so cross-platform compatibility is important for me.

For audio, I use the Sennheiser AVX wireless mic system. Handles loud environments with ease. The system is about as close to plug-and-play as you can get. For audio recording, I use the PIX-LR audio interface adapter for the PIX-E5. It attaches on the bottom and allows the use of two XLR inputs. The audio sounds amazing, thanks to the implementation of the legendary Audio Devices analog pre-amps and analog limiters.

I'm hoping to publish and article, a video guide or both on best practices for SL video shooting and post-production workflow.

Loved the lenses. The video is extremely well done. Luis you sounded like narrator on a NG special, great.

Scott

This video was shot in L-Log, but all of my Photokina reporting was done without shooting in Log. Log gives you more ability to adjust your look later and gives more flexibility in the files.

I apply a LUT in Premiere Pro CC in the Lumetri Color controls. For past videos, I've created my own 3D LUT in Davinci Resolve by using a Datacolor SpyderChecker. For this video of Luis in Little Havana, I decided to try something else, so instead used a stock ARRI Alexa LUT that comes pre-loaded into Premiere. The result was a nice “Miami” look. The only downside was losing some of my highlight detail, but the overall look is really nice. Much of color grading is subjective.

Whether shooting in Log and applying a LUT or recording straight with no Log, I still color correct (grade) all my clips so that they have a color continuity through the whole project. I do this through the use of adjustment layers in Premiere Pro, again with Lumetri color controls.

I've never used Final Cut, so can't speak to how this would work under that workflow.