Register
A password will be e-mailed to you.

Leica has issued new, updated firmware for the entire range of Leica M10-generation cameras, including the M10-R, M10-P, M10 Monochrom, M10, and M10-D. The firmware adds 6-bit code support and a lens correction profile for the newly introduced 35mm f/1.4 Summilux-M v1 ‘Steel Rim'.

Even if there are no other bug fixes or improvements going by the release notes, it's always good practice to keep updated to the latest firmware version. To simplify, we've aggregated all the firmware files by camera type below. Simply click the one for your camera to download, then scroll down for instructions based on your camera model.

Camera ModelFirmware Version
Leica M10-R30.22.23.34
Leica M10-P4.22.23.34
Leica M10-P “ASC 100 Edition”3.22.23.52
Leica M10 Monochrom4.22.23.34
Leica M103.22.23.38
Leica M10-D3.22.23.52
  

How to Update Your Firmware on M10-R / M10-P / M10 Monochrom / M10

  1. Download the latest firmware version
  2. Save the download to the memory card
  3. Insert the memory card into the camera
  4. Switching the camera on
  5. Select Camera Information in the main menu
  6. Select Camera Firmware
    • This menu item is available only if a current firmware file is stored on the inserted memory card.
    • A prompt with information about the camera is displayed.
  7. Check the version information
  8. Select Yes
    • The update will start automatically.
    • Once the process has completed successfully, a relevant message will be displayed and the camera will restart.

Notes

The camera must not be switched off before the update is completed.

A warning message will appear if the battery is insufficiently charged. Recharge the battery and then repeat the process described above.

  

How to Update Your Firmware on M10-D

  1. Download the latest firmware version
  2. Save the download to the memory card
  3. Insert the memory card into the camera
  4. Press and hold the function button and switch on the camera
    • UP will appear in the viewfinder during the update process
    • In case of an error, Err will be displayed
    • End will appear after a successful update is completed

Notes

The camera must not be switched off before the update is completed.

A warning message will appear if the battery is insufficiently charged. Recharge the battery and then repeat the process described above.

  

Leave a Reply

Your email address will not be published.